5-Pack of Active-Pro Debugger and Logic Analyzer

5-Pack Active-Pro Bundle - Discover the Active-Pro Debugger and Logic Analyzer, the ultimate tool for advanced firmware development. With its innovative Active Debug Port, this device delivers real-time, high-definition insights into your embedded systems, allowing you to track and analyze variables, states, and interactions across multiple processors. The Active-Pro is equipped with powerful firmware debugging features like real-time variable graphing and an automatic packet field decoder, giving you a clear and easy to understand view into your firmware design. Ideal for use with a wide range of microprocessors and FPGAs, the Active-Pro simplifies complex debugging tasks, making it a must-have for serious engineers.

Digital Inputs

• Sample Buffer Depth (limited only by disk size): > 4 Trillion

• Digital Channels: 8

• Digital Sample Rate for logic traces: 120 Msps

• Digital Signal Fastest Measurable: 60MHz

• Digital Sample Rate Hardware Decoders: 240 Msps

• Digital Logic Families Supported: 1V to 5V variable

• Digital Input Voltage Range: -0.5V to 6V

• Digital Input Impedance: 1M || 10pf

• Sample Compression: Proprietary Lossless Compression

• Capture Time Per Gigabyte Example (1MHz I2C register read every 10 msec): 383K Seconds = 4.4 Days

Oscilloscope Inputs

• Analog Channels: 3 Single Ended or 2 Single Ended + 1 Differential

• Analog Input Voltage Range: 0V to 20V, or -10V to +10V measurable, -30V to +30V tolerant

• Analog Input Impedance: 1M || 10pf

• Analog Sample Rate for Single Ended Channels: 1Msps

• Analog Single Ended ADC: 12-bits

• Analog Sample Rate for Differential Channels: 200Ksps

• Analog Differential ADC: 15-bits

• Dynamic Current Measurements using Differential Input

Hardware and Software Bus Decoding

• I2C, SPI, UART, 1-Wire, MDIO, LIN, CHSI

• RS232 and DS101

• I2C Decoding: Automatic Signal Detection

• SPI Decoding: Automatic Signal Detection

• UART/ASYNC Decoding: Automatic Baud Rate Detection

• ACTIVE Debugger Interface: Automatic Signal Detection

• EE101 Debugger Interface: Automatic Signal Detection

• Internal decoder sample rate: 240Msps

• Packet Presenter runs on all protocols Channels: Yes

• Packet Presenter Fields Graphable: 63

Outputs

• Digital Channels: 2

• Digital Output Levels: 0V, 3.3V and tri-state

• Digital PWM Control: 0 to 100% @ 250kHz

• Digital Drive Current: 8mA max

• Analog Channels: 2

• Analog Output DC Levels: 0V to 3.3V variable and tri-state

• Analog Waveforms: Sine, Ramp, Triangle, Square

• Analog Waveform Frequency: 62.5 to 25K Hz

• Analog Min and Max Voltage Range: 0V to 3.3V in 0.1V steps

ACTIVE Debugger

• Active Devices monitored simultaneously: 4 (A, B, C and D)

• Active Debug Pins Per Device: 1 (UART) or 2 (Clock and Data)

• Active Variables graphed per device: 64

• Active Debug Channels per device: 64

• Firmware Control of Active-Pro App: LED Color, Capture Start and Stop, Beep, Screen Capture and Capture Save

• Debug Message Timestamp Resolution: 8.3ns

Accessories Included

• Test Leads: 19

• Test Clips: 19

• USB-C Cable

• Storage Case

Physical

• Size: 1.8" x 2.2" x 0.45"

• Weight: 0.7 oz

PC Connection and Power

• Windows, Mac and Linux

• Connection and Power: USB-C

• Connection Throughput: 480Mbps

• Power Consumption: 120 mA at full throttle

• Data Capture: Stream directly to disk

• Overcurrent Protection: 3 Resettable Polyfuse

Click here for more details

What You Get:

• 5 Complete Sets of each of the below

• Active-Pro Debugger and Logic Analyzer Pod

• Active-Pro Software Application (Windows, Mac, Linux)

• USB Cable (USB-A to USB-C), 3-foot

• 19 Test Clips and Color-Coded Leads

• Compact Storage Box

• 1-year Warranty